Get a Quote

HAZMAT mercury handling on an FSO vessel was completed with ease using the SupaVac SV60-V.

Our Malaysian partners, ZAR Lynx Sdn Bhd, removed 10–20 tons of sludge per tank, completing the project within just a few days using our 100% vacuum-operated pump.

Check out the new SupaVac case study on our LinkedIn page, SupaVac - Vacuum Solids Pumps.


#hazmat #fsovessel #oilgas #sludgeremoval #supavac #industrialcleaning #maritimeoperations #offshoreengineering #vacuumtechnology #wastemanagement #safetyfirst #zarlynx #casestudy

It’s the final day of OGA 2025! We cannot thank all the attendees enough for their interest in SupaVac Solids Pumps.

We were surprised to learn that many players in the Oil & Gas field still rely on outdated shovel-and-bucket methods. It is a perfect opportunity for our Australian-made solutions, backed by over 30 years of experience, to demonstrate how oily slurries, solids, and sludge can be removed safely and efficiently!

Visit us today at the Kuala Lumpur Convention Centre, Booth 1912, Hall 1, from 10 am to 5 pm for a chat with our SupaVac expert Daniel and our partners at ZAR Lynx Sdn Bhd.

Daniel, SupaVac’s Global Sales Representative, commenced his first day at OGA 2025, Southeast Asia’s premier Oil, Gas, Energy and Petrochemicals event.

SupaVac is proud to participate in Oil & Gas Asia from 2–4 September at the Kuala Lumpur Convention Centre.

We are located at Booth 1912, Hall 1, in collaboration with our partners, @zargroupmy . We look forward to welcoming you at our stand!

The SupaVac SV250 is one of our most powerful units, designed for heavy-duty sludge and mud removal.

It is widely used in FPSO tank cleaning, heavy crude transfer, barge and hull cleaning, drilling mud and cuttings transfer, coal fines, mining slurry transfer, and hazardous waste recovery applications.

The SV250V is engineered to handle a wide range of heavy sludges through 100 mm (4”) suction and discharge lines, with a vertical suction lift capacity of up to 30 m.

It can operate with various SupaVac Jet Packs ranging from 150 cfm (71 L/sec) to 1200 cfm (566 L/sec) with vacuum up to 29 Hg (-98 kPa) and outstanding air inlet velocities. This high-vacuum loading system can recover flowing slurries from up to 50 m (164 ft) and deliver them over distances of up to 1000 m (1640 ft), while remaining operable by a single person or in fully automated mode.

The SV250V can transfer more than 60 m³/hr (264 USGPM) at SG 1.0 with a single pump, and up to 120 m³/hr at SG 1.0 with synchronised dual-pump operation.

Equipped with next-generation pneumatics, the SV250V features a low (adjustable) discharge pressure for increased safety and reduced air consumption. The IP66 stainless steel control box includes countdown timers, pump cycle indicators, and improved safety, usability, and serviceability. Standardised components and quick-connect fittings further minimise downtime.

Lengthy material handling process? Need to transfer solids from one place to another? Working in the filtration or agricultural space?

SupaVac is the answer to all your needs:

* Filter media removal
* Agricultural products and waste transfer
* Offal removal
* Sump cleaning
* Effluent transfer
* Sump desludging
* Seed transfer

Check out the new SV case study on our LinkedIn page, SupaVac - Vacuum Solids Pumps. Shared by our Colombian partners @psa_sas , it highlights how processing time can be reduced by 66%, enabling operators to complete the job in just 1 day with SupaVac instead of 3 days using traditional methods.


#supavac #australianmade #agricultureequipment #farminginnovation #materialhandling #wastemanagement #filtration #effluentmanagement #seedprocessing #slurrysolutions #pumptechnology #farmingtips #australianmanufacturing #processimprovement #casestudy

Pyrmont approved sludge removal👍

Last week we sent several SupaVac Solids Vacuum Pumps for an urgent job in Pyrmont, right next to Darling Harbour in the heart of Sydney’s CBD. This was not only a critical job, but also highly important due to the significant impact it had on our favourite city, home to the world-leading Australian-made SupaVac pumps.

It is fantastic to have a rental fleet on hand and a responsive team of professionals ready to tackle any challenge the slurry removal industry throws our way!



#sydneycbd #pyrmont #darlingharbour #sydneybusiness #madeinaustralia #sludgeremoval #slurrypumping #industrialpumps #wastemanagement #miningservices #civilconstruction #marineindustry #watermanagement #environmentalservices #infrastructureprojects

A new mining partner has joined the SupaVac family, welcome, Quarry Mining and Construction Equipment!

Earlier this week, several representatives from Quarry’s fitting team travelled from the Hunter Valley to Sydney for practical training. They learned more about SupaVac and gained hands-on experience at @airautomationgroup headquarters. It was also a great opportunity to introduce them to other products we manufacture in-house, such as Airmation valves and cylinders.

For over 30 years, SupaVac pumps have been proudly manufactured in Australia using Australian-made components. Partnering with like-minded Australian companies like Quarry Mining allows us to strengthen local industries, support communities, and deliver world-class solutions.

Let’s pump the unpumpable together, Quarry Mining!



#miningaustralia #australianmade #supavac #australianmanufacturing #miningsolutions #pumpingtechnology #miningequipment #australianmining #huntervalley #supportlocal #heavymachinery